The use of angle grinders can be extremely dangerous, posing a risk not only to the operator but to others in the work area. This safety short gives you some checks that should be performed before operating an angle grinder.

RUNNING TIME: 1 Minute

An awareness of a chainsaw’s condition is vital in the safe and successful operation of the chainsaw.

This program will concentrate mainly on the fuel powered type of chainsaw but essentially the safety and operational considerations are very much the same for the various types.

RUNNING TIME: 5 Minutes

There are a variety of timber cutting tasks that can be undertaken using a chainsaw however the ones that this program will cover are:

• Limbing
• Cross-cutting or Bucking
• Ripping
• and Felling

There is no doubt that a chainsaw can be a very dangerous tool and that there is no substitute for proper training and a professional approach to their use.

RUNNING TIME: 5 Minutes

A two-stroke engine runs on a mixture of fuel and oil. Check your operator’s manual for correct fuel/oil ratios and oil types.

It is vital to make the mixture according to the recommended ratio as engine damage may occur with the wrong fuel mixture. Creating this mixture in a controlled environment helps to minimise the risk of contaminants in the mixture

RUNNING TIME: 3 Minutes

When operating a chainsaw, it is vital that all safety measures relating to the operation of the saw be practiced at all times. Do not use a chainsaw that is back–firing, missing parts or not running properly. It is dangerous and is a potential fire hazard.

Having a strong understanding of the safe operation basics is key to completing any chainsaw operation successfully and safely.

RUNNING TIME: 4 Minutes

When working with chainsaws, certain safety procedures must be practiced to protect the chainsaw operator and those working in the immediate vicinity from injury.

The most common parts of the body which are injured by chainsaw accidents are the hands, knees, feet and head especially on the left side of the body. However, with the application of proper work practices, the use of modern equipment, and correct protective clothing, chainsaws can be used efficiently and safely.

RUNNING TIME: 2 Minutes

There are a wide range of saw chains to choose from however the major factors that need to be taken into consideration are the type of work to be undertaken, the type of timber to be cut and the Chain Cutter Profile which is best suited to your purpose.

RUNNING TIME: 3 Minutes

It is always preferable to start the chainsaw on the ground. However, in some situations, it’s not appropriate or practical.

There should be no people or animals in the vicinity of the saw as those without sufficient personal protective equipment, for example, safety glasses or hearing protection, will be exposed to significant potential harm.

RUNNING TIME: 4 Minutes

Circular saws are used extensively for a variety of cutting operations. This safety short gives you a quick overview of how to operate a circular saw.

RUNNING TIME: 1 Minute

Compressed air is not ‘just air’, it is air travelling in an intense stream at a high velocity. Exposure to it can result in severe injuries or even fatality. This safety short gives you a quick overview of the do’s and don’ts when using compressed air.

RUNNING TIME: 2 Minutes

The only safe approach to working in confined spaces is to diligently follow the instructions that are detailed in a Confined Space Work Permit and to utilise any personal protective equipment that has been identified as necessary. This safety short gives you a quick overview of Confined Space Entry Permits.

RUNNING TIME: 1 Minute

Every year there are serious accidents involving Confined Spaces. This safety short explains how you can define what a Confined Space is.

RUNNING TIME: 1 Minute

At the beginning of the job, contractors, along with everyone doing work in the location, should receive a safety induction. This safety short gives you a quick overview of what a safety induction is and what information should be included in it.

RUNNING TIME: 3 Minutes

Consideration of health and safety issues must begin at the planning stage, before the contractor has started work. This safety short covers some important questions that should be asked when planning work for a contractor and potential hazards a contractor may encounter.

RUNNING TIME: 5 Minutes

One of the most important considerations in contract management is so-called “task creep”. This can occur when, after the contractor’s task is assigned, the job requires more work than was originally agreed. This safety short briefly explains what ”task creep” is and why it’s an important consideration.

RUNNING TIME: 1 Minute

Coronaviruses are a large group of viruses that can cause illnesses ranging from the common cold to more severe diseases. This safety short examines the various ways in which Coronaviruses can be spread.

RUNNING TIME: 1 Minute